Care and Maintenance Tips for Large-Scale Metal Sculptures
Large-scale metal sculptures in Springfield are a unique and beautiful way to enhance the aesthetic appeal of your home and business, both indoors and outdoors. A creative mind takes inspiration from nature and its surroundings to present you with mesmerizing artwork that will leave you and everyone awestruck. However, they demand care and maintenance.
Metal may degrade and tarnish when exposed to environmental and accidental damage. This situation can be avoided with correct preservation and atmosphere techniques. Read on to learn about care and maintenance tips for large-scale sculptures in Springfield.
• Care Routine
Outdoor large-scale metal sculptures in Springfield are more exposed to extreme weather conditions such as significant temperature fluctuations, snow, soil, and rain. Cleaning them regularly by removing pollutants, bird dropping, and dirt can help preserve their beauty. Using a garden hose, you can quickly get rid of loose dirt. Mix up unscented liquid detergent with water for a more stubborn patch of dirt, and clean the sculpture with a sponge. Always rinse the solution with clean water, preferably deionized or distilled water.
It is also recommended to go for a waxing treatment for your metal sculpture at least four times a year. Don’t forget to keep your large-scale metal sculpture rag buffed and clean between wax treatments. It will prevent an accumulation of droppings and dirt on the piece.
A step-to-step guide on cleaning large-scale sculptures in Springfield is
Step 1: Wash the metal sculpture with warm water and a soft cloth. To remove the dirt on the corners, clean it with a soft toothbrush or soft non-wire brush. If required, you can also use a tiny amount of liquid detergent. Don’t forget to wash the sculpture thoroughly. Step 2: Bird droppings and tree resins are destructive to patinas. It should be removed with warm water at the earliest. Stubborn droppings can be removed by gently scraping them with a soft plastic spatula. Step 3: Let the sculpture dry. If the weather is warm, a few hours are sufficient. Ensure that the water is evaporated from the metal’s pores. Step 4: Apply the wax to the metal surface with a soft shoe brush or bristle brush. It should be a clear wax without turpentine and alcohol as an ingredient. Rub the wax in a circular motion into the metal surface in a uniform, thin coat. If the coat is thick, the wax may turn white and show brushstrokes. Step 5: It might take about 20 minutes to dry. Once it is dried, buff the surface with a clean, soft cloth for a good gloss.
An important point to remember is that this cleaning method is inappropriate if the sculpture has any loose pieces, active corrosion, or flaking.
• Don’ts of Cleaning Large-Scale Metal Sculpture
Things you should avoid when cleaning metal sculptures are • Chemicals, tarnish removers, and clean solution • Exposure to chlorine, pesticides, fertilizer sprays, bug sprays, ammonia, and other household products • Abrasive cleaning pads, sandpaper, or steel wool.
Bottom Line
Installation of a beautiful large-scale metal structure is not enough. You must follow a proper care and maintenance routine to preserve its appeal. Follow the guide shared above for the same.
